Your browser does not support JavaScript!

NUEVO

 

Nuevo Re-Wireable Switch Fuse Unit

 

The Re-Wireable Switch Fuse Units by Fybros are used for distributing power, protecting electrical devices and cables from damage due to power fluctuations. The fuse unit is housed in an enclosure made using a quality CR sheet. The fuse units are stringently tested in compliance with the required industry standards.

Switch fuses are commonly used for industrial and domestic purposes.

 

Nuevo Changeover Switch (Off Load)

 

A comprehensive range of general-purpose load changeover switches with side handle operation finds wide application in all general industries where individual systems require safe and reliable transfer of power from main supply to standby and vice versa. Load changeover switches are supplied in CR sheet enclosure, side operated with three stables positions. |-O-|| (Centre-off-position).

This is the type of changeover in which the time delay is provided with the help of the unit so that after changeover between supplies load is connected to other sources of supply after a particular time delay. This is a better-preferred method as it avoids surges or sparking which can occur due to sudden connection of load after the changeover.

 

Nuevo Rewireable Kit Kat Fuse Unit

 

Porcelain Fuse Unit (Kit Kat) is a semi-enclosed fuse or re-wireable fuse specifically utilized in industrial, commercial, and domestic electrical fittings for ensuring flawless power distribution. There are two parts: fuse wire and fuse base. The fuse wire is attached to the fuse carrier which can be removed or connected to the fuse base. The phase wire is permanently connected to the fuse base. Its maximum capacity is up to 4kA.

 

Nuevo Sheet Metal Cutout

 

Sheet metal cutouts are the enclosures for Kit Kat fuse which protects fuse units from dust and water. These cutouts are suitable for surface mounting.

 

Nuevo Reverse and Forward Switch

 

Reverse and Forward Switch is an electric switch that has four terminals capable of being connected in pairs in two different ways so as to reverse the direction of current flow. This switch is widely demanded to be installed in various devices for controlling their reverse operation. Reverse and Forward Power Control Switches are widely acclaimed in the industry due to their reliability.

 

Nuevo Busbar Chamber

 

Busbar Chamber is designed for safe, reliable, and economical distribution of power to various loads as per the requirements of the system. A Busbar is a metallic strip or bar, typically housed inside switchgear, panel boards, and busway enclosures for local high current power distribution. They are also used to connect high voltage equipment high at electrical switchyards and low voltage equipment in battery banks.

They are generally uninsulated and have sufficient stiffness to be supported in air by insulated pillars. These features allow sufficient cooling of the conductors, and the ability to tap in at various points without creating a new joint.

Built with sturdy construction, Fybros CCTV cables are durable, highly shockproof, and offer high tensile strength.

 

Nuevo HRC Fuse Holder

 

HRC FUSE (High Rupturing Capacity) is a protection device used to protect a device or circuit from severe damage caused due to over current or short circuit faults. The fuse is specifically designed for the production of general industrial applications. Its maximum capacity is up to 80ka.

It contains a fuse wire in it which carries the short circuit current safely for a given time period. During this period, if the fault is removed, then it does not blow otherwise it will melt and remove the circuit from the electrical supply hence, the circuit remains safe. The common material which is used to make an HRC Fuse is glass, but this is not always the case. Other chemical compounds are also used in HRC Fuse manufacturing and construction based on different factors. Its external enclosure is made fully airtight in order to provide the effect of the atmosphere on the fuse materials. The major objection to HRC Fuse is the low and uncertain breaking capacity of the semi-enclosed fuse. .

Rewireable switch fuse kit sheet metal SPN/DP

Rewireable switch fuse kit sheet metal SPN/DP

Rewireable switch fuse kit sheet metal TP

Rewireable switch fuse kit sheet metal TP

Changeover sheet metal switch DP/TP/FP

Changeover sheet metal switch DP/TP/FP

Knife type Changeover sheet metal switch fuse units

Knife type Changeover sheet metal switch fuse units

Rewireable kit kat fuse unit porcelain fuse units

Rewireable kit kat fuse unit porcelain fuse units

Rewireable kit kat fuse unit porcelain fuse units - Turbo series

Rewireable kit kat fuse unit porcelain fuse units - Turbo series

Kit Kat fuse unit sheet metal cutout

Kit Kat fuse unit sheet metal cutout

Reverse Forwarding Switch

Reverse Forwarding Switch

Busbar Chamber

Busbar Chamber

HRC Fuse Holder

HRC Fuse Holder