Upgrading your home lighting is one of the quickest ways to freshen up your space. A small LED tube light is typically a T5-style batten that is 1 foot or 2 feet long. These are very popular in Indian homes for task lighting. Because modern LED tube light small designs are "integrated," the bulb and the fixture are usually one single piece. This means when you are ready for a replacement, you often replace the entire slim unit. With the right guide, you can swap out your old small tube light LED for a bright new Fybros Casa model without any stress.
Before you start, make sure you have everything ready. You don’t need much for an LED tube light, small size installation:
A new Fybros Casa 5W or 10W small LED light tube.
A sturdy ladder or stool.
A line tester to check for current.
Electrical insulation tape (if you are connecting wires directly).
Safety is the most important part of any electrical job. Go to your main switchboard and turn off the power to the circuit you are working on. Even if the wall switch is off, it is best to be safe. Use your tester to make sure no electricity is reaching the small tube LED light. This prevents any accidental shocks while you handle the wiring.
Most LED small tube light units are held in place by small metal or plastic clips. Gently pull the unit away from the wall until it snaps out of the clips. If your light is a plug-in type, simply pull the plug out. If it is hard-wired, carefully untwist the wire connectors or remove the insulation tape to disconnect the old LED tube light small from the house wiring.
Now, take your new Fybros small LED tube light for bathroom or kitchen use. If the old clips match, you can simply snap the new light into them. If not, screw the new clips that came in the box into the wall. Connect the wires, usually red to live and black to neutral, and wrap them tightly with insulation tape. Since the small LED tube light price is so affordable (starting around ₹180), it is always better to install a fresh unit than to try to repair an old one.
Once the light is securely snapped into its clips and the wires are tucked away, go back to your switchboard. Turn the power back on and flip the wall switch. Your new tube light LED should glow instantly without any flickering. Because Fybros uses high-quality drivers, you’ll notice the LED tube light watts are low, but the brightness is impressive.
Changing a small LED tube light is a great DIY project that anyone can handle. By following these steps, you ensure your home stays bright and safe. Modern LEDs from Fybros offer a long life of up to 30,000 hours, so once you’ve finished this change, you won't have to worry about it again for a very long time. It is a cost-effective way to keep your home looking its best.
Safety First: Always turn off the main power before touching any wires.
Easy Fit: Most small battens use simple snap-in clips for installation.
Low Power: A 5W or 10W LED provides plenty of light for small spaces.
Long Lasting: Quality Fybros LEDs reduce the need for frequent replacements.
1. What Are Small Tube Lights Called?
In India, these are usually called T5 LED battens. A LED small tube light is often 1 foot (5W) or 2 feet (10W) in length, making them perfect for cupboards and mirrors.
2. Which Is Better: a small LED light or Led Tube Light?
A small led tube light is usually better for spreading light evenly over a surface, like a kitchen counter, whereas a small bulb or spot light is better for focusing on one point.
3. Can I Directly Replace Fluorescent Tubes With LEDs?
Yes, but since most small led tube light price options are for integrated battens, you usually remove the old fluorescent fixture entirely and snap the new LED unit in its place.
4. How to Install Small Led Lights Without a Plug?
For a small tube light led without a plug, you must connect the wires directly to your home's internal wiring point using insulation tape to keep the connection safe and dry.
Fans
Switches & Accessories
Led Lighting
Wires & Cables
Switchgear